Wi-Fi Troubleshooting Methods
Make sure all cables are plugged in securely and that there is no interference.
Try restarting your device and your router.
If you’re still having trouble, try connecting to a different network or using a different device to access the internet. ..
Make sure WiFi is turned on.
Check if airplane mode is off.
Check if the detected and trusted wifi internet connection appears in the web list.
In this case, you should select wifi connection access and try connecting.
If you are connecting using the network name, click Disconnect, wait a moment, and then select Connect again.
Try connecting to a wifi connection in another frequency band.
Make sure the physical wireless switch on your laptop is turned on ..
Troubleshooting Your Internet Connection.
- Check your network connection and make sure it’s working properly.
- Check your router and make sure it’s up to date.
- Check your modem and make sure it’s working properly.
- Check your phone and make sure it’s connected to the network.
Select Start Button> Settings> Network and Internet> Status. Open the network and click the internet status settings. Under Change connection settings, select Fix network connection problems. Follow the troubleshooting steps below to see if the connections are restored. Reboot the wireless router. The process will help establish a new connection to your Internet Service Provider (ISP). ..
It will temporarily disconnect all users’ access to the internet server.
Disconnecting the Modem
If you are having problems with your modem or router, it may be because they are not working properly. There are a few different ways to fix this, but the most common one is to restart them. This can be done by going to your computer and clicking on the Start button. Then, you will need to type in “reboot modem” and hit enter. After that, you will need to wait for the computer to reboot and then your modem or router will be working properly again.
If your modem is not working, remove the battery and connect the modem to power. The LED on the modem will blink. Let’s stabilize the blinking indicator by reconnecting the router to power. You can usually confirm that you are ready by looking at the status lights on the two devices.
Identify The Specific Cause of The Problem.
There are a variety of factors that can cause connectivity issues, such as problems with websites, devices, wireless routers, modems, or Internet service providers. To determine the cause of the problem, try the following methods: ..
When the wifi connection icon is visible on the right side of the taskbar, go to another page on your browser. If the browser loads, there may be a problem. If you cannot connect to another server, you should proceed to the next step. Use another laptop or phone to connect to the internet. If you can connect, the device may be causing the problem. Go to the internet server section for troubleshooting your device. If none of your devices can connect you to the internet, you should proceed to the next step. Check to see if there is a problem with the connection with the wireless router. To do this, use the ping test
Executing the Run Methods
- Reset the TCP / IP stack and release and update the IP address.
- Try to connect to a network service that offers an IP address reset service.
To troubleshoot a network connection issue, try the following:
- Open the “Command Prompt” on your computer.
- Type “netstat -an” and press Enter.
- Look for any errors or problems with your network connection.
- If you’re still having trouble connecting to your network, try removing the adapter connection driver and restarting your computer. Windows will install the updated driver immediately.
- If the connection of the network malfunctions due to an upgrade, you should adhere to the next procedure before deleting the driver: Before deleting the driver, make sure you have the driver aside as a backup in case it’s needed again later on down the road.
- Type “Device Manager” in the search box on your taskbar and select it from the list of results. To find out which adapter is connected to your device, expand Network Adapters in Device Manager and hold down (or right-click) on an internet connection adapter selector and select Uninstall Device> Remove Driver Software for This Device check box> Uninstall from thereonforth (note: this may require a reboot). After uninstalling the driver, restart your computer by typing “Start>Power>Restart.” ..
Network Reset
If you are still having trouble connecting to the internet, there is one final option: a reset. This will erase all of your current internet settings and start you off from scratch. ..
From the Start menu, select Settings> Network and Internet> Status. Reset Network. Open the internet connection access. Wait for the computer to restart and see if that resolves the connection. ..
One possible solution to the problem is to realize that the smallest you can imagine may be the best solution. ..